5.1 The grinding balls tolerance of the diameter should be accord with Table 1. 5.2 The main chemical composition of each grades should be accord with Table 2. 5.3 Mechanical Property 5.3.1 The surface hardness should be accord with Table 3 5.3.2 The hardness between the casting head surface to the centre of the balls can not be over 3 degrees. Diameter balls size over dia90mm, the grade is ZQCr2 and the other special situation, the hardness differences negotiate between the contracting parties. 5.3.3 The broken rate of the Grade ZQCr26, ZQCr20, ZQCr15, ZQCr12 grinding balls should be less than or equal to 1%. The other grades, the broken rate should be less than or equal to 2%. The special conditions, the requirements need to negotiate between the contracting parties. 5.3.4 Whether regarding the impact value as the acceptance standard depends on the contracting parties. 5.4 Casting grinding ball does not allow cracks and the defects, like slag, sand hole, shrinkage hole, shrinkage porosity, gas hole, cold separation, etc. Which will affect the using. 5.5 Metallographic Structure The metallographic structure is the essential quality inspection content in the production process of casting grinding ball. Not as acceptance standard for products. If there is any special need, both parties should agree on itName Grade Chemical Composition (%) C Si Mn Cr Mo Cu Ni P S Alloyed cast iron grinding balls ZQCr26 2.0-3.3 ≤ 1.2 0.3-1.5 >23.0-30.0 0-3.0 0-1.2 0.-1.5 ≤1.0 ≤0.06 Alloyed cast iron grinding balls ZQCr20 2.0-3.3 ≤ 1.2 0.3-1.5 >18.0-23.0 0-3.0 0-1.2 0.-1.5 ≤1.0 ≤0.06 Alloyed cast iron grinding balls ZQCr15 2.0-3.3 ≤ 1.2 0.3-1.5 >14.0-18.0 0-3.0 0-1.2 0.-1.5 ≤1.0 ≤0.06 Alloyed cast iron grinding balls ZQCr12 2.0-3.3 ≤ 1.2 0.3-1.5 >10.0-14.0 0-3.0 0-1.2 0.-1.5 ≤1.0 ≤0.06 Alloyed cast iron grinding balls ZQCr8 2.1-3.3 ≤ 2.2 0.3-1.5 7.0-10.0 0-1.0 0-0.8 – ≤1.0 ≤0.06 Alloyed cast iron grinding balls ZQCr5 2.1-3.3 ≤ 1.5 0.3-1.5 4.0-6.0 0-1.0 0-0.8 – ≤1.0 ≤1.0 Alloyed cast iron grinding balls ZQCr2 2.1-3.6 ≤ 1.5 0.3-1.5 1.0-3.0 0-1.0 0-0.8 – ≤1.0 ≤1.0 Ductile iron grinding balls ZQQTB 3.2-3.8 2.0-3.5 2.0-3.0 – – – – ≤1.0 ≤0.03 Ductile iron grinding balls ZQQTM 3.2-3.8 2.0-3.5 0.5-1.5 – – – – ≤1.0 ≤0.03 NAME GRADE SURFACE HARDNESS /HRC Alloyed cast iron grinding balls ZQCr26 ≥58 Alloyed cast iron grinding balls ZQCr20 ≥58 Alloyed cast iron grinding balls ZQCr15 ≥58 Alloyed cast iron grinding balls ZQCr12 ≥58 Alloyed cast iron grinding balls ZQCr8 ≥48 Alloyed cast iron grinding balls ZQCr5 ≥47 Alloyed cast iron grinding balls ZQCr2 ≥45 Ductile iron grinding balls ZQQTB ≥50 Ductile iron grinding balls ZQQTM ≥52
Betty 86 158 5636 2791
Star 86 18756355533 starwang577322@foxmail.com
Address: Heli Industrial Zone, Ningguo City, Xuancheng, Anhui Province, China.
molding line
metal mold
heat treatment furnace
grinding media
Ball Production Ancillary Facility
Wrench
Induction Furnace
Ningguo Dexin New Material Co., Ltd. all rights reserved 
